2005 Aluma MCT

Bought this trailer used and decided to install carpet on the inside to make it a little nicer to use. With help from lots of posts on the 1800riders forum and special thanks to Diesel-Dawg who went out of his way to help me, I was able to finish this all up in about 3 hours time.

Before picture

I used 3/4" foam board from Lowes to smooth up the sides attaching it with 3M spray adhesive

I removed the gas cylinders from the lid so it would fold back and make it easier to work with

Back wall and door latch

Carpet was installed with 3M spray adhesive


I did not like the way the latch looked so I went back and covered it with carpet later.